The Combination of welding and soldering for repair of frames of transport vehicles.

Authors

  • В.І. Савуляк
  • С.А. Заболотний
  • Д.В. Бакалець

Abstract

The frame constructions of transport and technological machines perceive the static load and dynamic load as a result of hat in the process of exploitation cracks and other damages on certain areas are appeared. By the problem of establishment of elements of strengthening in dangerous areas, and also proceeding in descriptions of durability of such areas with the engendered cracks, there is a danger of damage of parent metal frames due to negative processes, which can take place during welding. For indemnification of these negative consequences a scarf-welding method is developed, which provides for placing in the area of temperatures, which provide its melting, soldering material on the basis of copper between details which weld. It is well-proven researches, that renewal and strengthening of steel constructions by the use of the developed technology of welding and soldering with the use of solders on the basis of copper except for the increase of descriptions of durability provides effective slushing defence of surfaces of details in the thermal affected zone.

References

1. Maksapetjan G.V., Kochinjan G. Dzh. Opredelenie naprjazhennogo sostojanija ram gruzovyh avtomobilej pri razlichnyh kuzovah, Sbornik nauchnyh trudov ArmSHI, 1977, Vyp. XXVIII, pp. 112-115.
2. Mironov E.I., Ivanova Z.V. Novyj sposob jeksperimental'noj ocenki nagruzok manipuljatorov suchkorezno-raskrjazhevochnoj ustanovki, Stroitel'nye i dorozhnye mashiny, 1983, №8, р. 20.
3. Troshhenko V.T., Hamaza L.A., Pokrovskij V.V. Ciklicheskie deformacii i ustalost' metallov. T. 2. Dolgovechnost' metallov s uchetom jekspluatacionnyh i tehnologicheskih faktorov. K.: Naukova dumka, 1985. 222 р.
4. Bakalec' D.V., Savuljak V.І. Pіdvishhennja nadіjnostі ta vіdnovlennja metalokonstrukcіj transportnih ta sіl's'kogospodars'kih mashin, Zbіrnik naukovih prac' Vіnnic'kogo nacіonal'nogo agrarnogo unіversitetu. Serіja Tehnіchnі nauki, 2012, Vyp. 11(66), T. 2, pp. 302–306.
5. Savuljak V.І., Bakalec' D.V. Vpliv zalіkovuvannja trіshhin mіdnimi splavami na mіcnіst' stalevih konstrukcіj, Vіsnik Vіnnic'kogo polіtehnіchnogo іnstitutu, 2012, №4, pp. 172 –175.
6. Ljapіna. O.V. Fіziko-hіmіchnі procesi na poverhnі plіvok mіdnih splavіv : avtoref. dis. na zdobuttja nauk. stupenja kand. hіm. nauk: spec. 01.04.18. “Fіzika і hіmіja poverhnі”, Prikarpats'kij nacіonal'nij unіversitet іm. Vasilja Stefanika, Іvano-Frankіvs'k, 2006. 20 p.
7. Savuljak V.І., Zabolotnij S.A., Shenfel'd V.J. Temperaturnі polja ta deformacії pіd chas vіdnovlennja detalej transportnoї tehnіki, Vіsnik Shіdnoukraїns'kogo nacіonal'nogo unіversitetu іm. Volodimira Dalja, 2009. №11(141), pp. 48-52

Published

2015-06-18

How to Cite

Савуляк, В., Заболотний, С., & Бакалець, Д. (2015). The Combination of welding and soldering for repair of frames of transport vehicles. Problems of Tribology, 73(3), 17–21. Retrieved from https://tribology.khnu.km.ua/index.php/ProbTrib/article/view/380

Issue

Section

Articles