To the question of estimation of teeth interaction conditions in bevel gear on contact parameters and tribotechnical characteristics. Part 2. Helical gear

Authors

  • М.В Чернець
  • Ю.М. Чернець

Abstract

In the paper are presented the results of estimation of maximum contact pressures, wear and durability of bevel helical gear taking into account parity of teeth engagement, change of their involute profiles curvature in the result of wear and angular correction of engagement. Calculation of bevel gear is conducted as for the equivalent cylindrical gear according to the author’s method. The established regularities of influence of mentioned conditions of teeth interaction in front and in-ternal cut of bevel wheels rim are presented graphically. Optimum values of correction coefficients, which provide maximum gear durability, are revealed.

References

1. Chernec M.V., Yarema R. Do pytannja pro vplyv koryhuvannja zaczeplennja cylindrycznoi koso-zuboji peredaczi na ii dovhovicznist. Maszynoznavstvo, №10, 2011. S. 15 - 20.
2. Chernec M.V., Chernec Ju.M. Doslidzhennia umov zaczplennia zubiv cylindrycznoi evolventnoi peredaczi na kontaktnu micnist, znoszuvannia i dovhovicznist. Czast. 1. Postijni umovy vzaiemodiji u nekoryhovanomu zaczeplenni. Problemy trybologii, №3, 2014. S. 84 - 92.
3. Chernec M.V., Chernec Ju.M. Doslidzhennia umov zaczeplennia zubiv cylindrycznoi evolventnoi peredaczi na kontaktnu micnist, znoshuvannia i dovhovicznist. Czast. 2. Postiini umovy vzaiemodiji u koryhovanomu zaczeplenni. Problemy trybologii, №4, 2014. S. 6 - 15.
4. Chernec M.V., Chernec Ju.M. Doslidzhennia umov zaczeplennia zubiv cylindrychnoi evolventnoi peredaczi na kontaktnu micnist, znoshuvannia i dovhovicznist. Czast. 3. Zminni umovy vzaiemodiji u nekoryhovanomu zaczeplenni. Problemy trybologii, №4, 2014. S. 49 - 53.
5. Chernec M.V., Chernec Ju.M. Doslidzhennia umov zaczeplennia zubiv cylindrychnoi evolventnoi peredaczi na kontaktnu micnist, znoshuvannia i dovhovicznist. Czast. 4. Zminni umovy vzaiemodiji u koryhovanomu zaczeplenni. Problemy trybologii, №1, 2015. S. 69 - 76.
6. Chernec M.V., Chernec Ju.M. Do pytannja ocinky umov vzajemodiji zubiv u konicznij peredaczi na kontaktni parametry ta trybotehniczni harakterystyky. Czast. 1. Prjamozuba peredacza. Problemy trybologii, №, 3. 2015. S. 23-28.

Published

2016-02-12

How to Cite

Чернець, М., & Чернець, Ю. (2016). To the question of estimation of teeth interaction conditions in bevel gear on contact parameters and tribotechnical characteristics. Part 2. Helical gear. Problems of Tribology, 77(3), 29–35. Retrieved from https://tribology.khnu.km.ua/index.php/ProbTrib/article/view/460

Issue

Section

Articles