Increasing the durability of working elements of equipment for abrasive-containing masses processing
DOI:
https://doi.org/10.31891/2079-1372-2019-93-3-14-21Keywords:
wear-resistant coatings, abrasive wear, transporting, mixing, pressing, tungsten carbide, titanium carbide, titanium diborideAbstract
The operating parameters of modern equipment for transportation, mixing and pressing of an abrasive-containing masses are examined. The main wear modes are determined to which the working surfaces of the specified equipment are exposed during its operation. The list of main materials of which the working elements of the considered equipment are made, as well as the list of the main serial surfacing materials used for their hardening are shown. The mechanism of abrasive wear of coatings based on W2C – WC and coatings based on TiB2 – TiC was investigated
References
1. Mjuller O.D., Melehov V.I., Ponomareva N.G., Tjurikova T.V. Vlijanie otnositel'noj dliny fil'ery matricy na davlenie pressovanija termomodificirovannoj berezovoj kory v press-granuljatorah valkovogo tipa // Lesnoj zhurnal. – 2017. № 5. P. 110–118.
2. Vinogradov V. N. Abrazivnoe iznashivanie / V. N. Vinogradov, G. M. Sorokin, M. G. Kolokol'nikov. – M.: Mashinostroenie, 1990. – 221 p.
3. Lorenc V.F. Iznos detalej, rabotajushhih v abrazivnoj srede/ V.F. Lorenc. – M.: Izd. AN SSSR, 1959. – 89 p.
4. Kashheev V. N. Ob iznashivanii pri trenii v abrazivnoj masse // V kn. Problemy trenija i iznashivanija. – K.: Tehnika, 1973. – P .53—59.
5. Popov S.N. Fizicheskie i materialovedcheskie osnovy iznashivanija detalej mashin [Digital sourse] / S.N. Popov. – URL: http://old.zntu.edu.ua/base/i2/iff/k3/ukr/tribos/books/izgotbm/izgot.htm.
6. Popov S.M. Tribotehnіchnі ta materіaloznavchі aspekti rujnuvannja stalej і splavіv pry znoshuvannі: Navchal'nij posіbnik /. S.M. Popov, D.A. Antonjuk, V.V. Netrebko. – Zaporіzhzhja: ZNTU, VAT «Motor Sіch», 2010. – 368 p.
7. Hrushhev M.M. Abrazivnoe iznashivanie / M.M. Hrushhev, M.A. Babichev. – M: Nauka, 1970. – 252 p.
8. Tenenbaum M. M. Iznosostojkost' konstrukcionnyh materialov i detalej mashin pri abrazivnom iznashivanii / M. M. Tenenbaum. – M.: Mashinostroenie, 1966. – 331p.
9. Vinogradov V.N. Iznosostojkost' stalej i splavov: Uchebnoe posobie dlja vuzov / V.N. Vinogradov, G.M. Sorokin. – M.: Neft' i gaz, 1994. – 417 p.
10. Vinogradov V.N. Abrazivnoe iznashivanie buril'nogo instrumenta / V.N. Vinogradov, G.M. Sorokin, V.A. Docenko. – M.: Nedra, 1980. – 207 p.
11. Sorokin G.M. Vzaimosvjaz' iznosostojkosti i mehanicheskih svojstv stali / G.M. Sorokin // Vestnik mashinostoenija. – 1990. – Vip. №11. – P. 9-13.
12. Dvoruk V.I. Vlijanie legirovanija matricy na strukturu i abrazivnuju iznosostojkost' makrogeterofaznogo kompozicionnogo splava / V.I. Dvoruk, M.V. Kindrachuk // Problemi tertja ta znoshuvannja: nauk.- tehn. zb. – K.: NAU, 2011. – Vip. 55. – P.106–111.
13. Pamfilov E.A. Iznashivanie detalej iz zhelezouglerodistyh splavov pri frikcionnom kontakte s drevesinoj / E.A. Pamfilov, Ja.S. Prozorov // Sistemy. Metody. Tehnologii. – 2012. – №1 (13). – P. 49-53
14. Pamfilov E.A. Some issues of tools hydrogen wear / E.A. Pamfilov, M.N. Petrenko // Dolgovechnost’ trushchikhsya detaley mashin: sb.st. – 1986. – № 1. – P. 148-153.
15. Lutsak D. L. Zmіcnennja robochih organіv obladnannja dlja vigotovlennja palivnih briketіv ta granul / D. L. Lutsak, O. V. Pylypchenko, M. J. Burda // Problems of Tribology. – 2015. – № 2. – P. 19-25.
16. Lutsak D. L. Formation of Structure and Properties of Composite Coatings TiB2-TiC-Steel Obtained by Overlapping of Electric-Arc Surfacing and Self-Propagating High-Temperature Synthesis / D. L. Lutsak, P. M. Prysyazhnyuk, M. O. Karpash, V. M. Pylypiv, and V. O. Kotsyubynsky // Metallofiz. Noveishie Tekhnol., 38, No. 9 – 2016. P. 1265-1278.
17. Lutsak D. Analysis of the microstructure of TiC-based surfaced layer by combin-ing arc surfacing with self-propagating high-temperature synthesis / D. Lutsak, P. Prysyazhnyuk, M. Karpash // Metallurgical and Mining Industry. No 2 – 2016. P. 126-132.
18. Samsonov G. V. Tugoplavkie soedinenija: Spravochnik / G. V. Samsonov, I. M. Vinickij. – 2-e izd. – M.: Metallurgija, 1976. – 560 p.
2. Vinogradov V. N. Abrazivnoe iznashivanie / V. N. Vinogradov, G. M. Sorokin, M. G. Kolokol'nikov. – M.: Mashinostroenie, 1990. – 221 p.
3. Lorenc V.F. Iznos detalej, rabotajushhih v abrazivnoj srede/ V.F. Lorenc. – M.: Izd. AN SSSR, 1959. – 89 p.
4. Kashheev V. N. Ob iznashivanii pri trenii v abrazivnoj masse // V kn. Problemy trenija i iznashivanija. – K.: Tehnika, 1973. – P .53—59.
5. Popov S.N. Fizicheskie i materialovedcheskie osnovy iznashivanija detalej mashin [Digital sourse] / S.N. Popov. – URL: http://old.zntu.edu.ua/base/i2/iff/k3/ukr/tribos/books/izgotbm/izgot.htm.
6. Popov S.M. Tribotehnіchnі ta materіaloznavchі aspekti rujnuvannja stalej і splavіv pry znoshuvannі: Navchal'nij posіbnik /. S.M. Popov, D.A. Antonjuk, V.V. Netrebko. – Zaporіzhzhja: ZNTU, VAT «Motor Sіch», 2010. – 368 p.
7. Hrushhev M.M. Abrazivnoe iznashivanie / M.M. Hrushhev, M.A. Babichev. – M: Nauka, 1970. – 252 p.
8. Tenenbaum M. M. Iznosostojkost' konstrukcionnyh materialov i detalej mashin pri abrazivnom iznashivanii / M. M. Tenenbaum. – M.: Mashinostroenie, 1966. – 331p.
9. Vinogradov V.N. Iznosostojkost' stalej i splavov: Uchebnoe posobie dlja vuzov / V.N. Vinogradov, G.M. Sorokin. – M.: Neft' i gaz, 1994. – 417 p.
10. Vinogradov V.N. Abrazivnoe iznashivanie buril'nogo instrumenta / V.N. Vinogradov, G.M. Sorokin, V.A. Docenko. – M.: Nedra, 1980. – 207 p.
11. Sorokin G.M. Vzaimosvjaz' iznosostojkosti i mehanicheskih svojstv stali / G.M. Sorokin // Vestnik mashinostoenija. – 1990. – Vip. №11. – P. 9-13.
12. Dvoruk V.I. Vlijanie legirovanija matricy na strukturu i abrazivnuju iznosostojkost' makrogeterofaznogo kompozicionnogo splava / V.I. Dvoruk, M.V. Kindrachuk // Problemi tertja ta znoshuvannja: nauk.- tehn. zb. – K.: NAU, 2011. – Vip. 55. – P.106–111.
13. Pamfilov E.A. Iznashivanie detalej iz zhelezouglerodistyh splavov pri frikcionnom kontakte s drevesinoj / E.A. Pamfilov, Ja.S. Prozorov // Sistemy. Metody. Tehnologii. – 2012. – №1 (13). – P. 49-53
14. Pamfilov E.A. Some issues of tools hydrogen wear / E.A. Pamfilov, M.N. Petrenko // Dolgovechnost’ trushchikhsya detaley mashin: sb.st. – 1986. – № 1. – P. 148-153.
15. Lutsak D. L. Zmіcnennja robochih organіv obladnannja dlja vigotovlennja palivnih briketіv ta granul / D. L. Lutsak, O. V. Pylypchenko, M. J. Burda // Problems of Tribology. – 2015. – № 2. – P. 19-25.
16. Lutsak D. L. Formation of Structure and Properties of Composite Coatings TiB2-TiC-Steel Obtained by Overlapping of Electric-Arc Surfacing and Self-Propagating High-Temperature Synthesis / D. L. Lutsak, P. M. Prysyazhnyuk, M. O. Karpash, V. M. Pylypiv, and V. O. Kotsyubynsky // Metallofiz. Noveishie Tekhnol., 38, No. 9 – 2016. P. 1265-1278.
17. Lutsak D. Analysis of the microstructure of TiC-based surfaced layer by combin-ing arc surfacing with self-propagating high-temperature synthesis / D. Lutsak, P. Prysyazhnyuk, M. Karpash // Metallurgical and Mining Industry. No 2 – 2016. P. 126-132.
18. Samsonov G. V. Tugoplavkie soedinenija: Spravochnik / G. V. Samsonov, I. M. Vinickij. – 2-e izd. – M.: Metallurgija, 1976. – 560 p.
Downloads
Published
2019-10-23
How to Cite
Ivanov, O., Prysyazhnyuk, P., Lutsak, D., Burda, M., & Lutsak, L. (2019). Increasing the durability of working elements of equipment for abrasive-containing masses processing. Problems of Tribology, 24(3/93), 14–21. https://doi.org/10.31891/2079-1372-2019-93-3-14-21
Issue
Section
Articles
