Parameter plasticity - the basic criterion for evaluation of elastic-plastic properties of construction materials.

  • С.Г. Костогриз
  • В.В. Мисліборський

Abstract

The application for quantitative evaluation of plastic deformation of solids under uniaxial tensile new authors proposed criterion - setting plasticity, which is the ratio of accumulated plastic deformation of solids to its elastic parts. It is shown that plasticity parameter is the basic criterion for the characterization of structural materials. Keywords: creep nominally fixed frictional contact (NNFK), tangential stiffness NNFK parameter plasticity contact uniaxial tensile deformation relative displacement, plastic properties, elastic-plastic properties, rheological model.

References

1. Kostogryz S. G. Mehanika vibracionnogo trenija v nominal'no nepodvizhnom frikcionnom kontakte: dis... d-ra tehn. nauk: 05.02.04 “Trenie i iznos”. Kostogryz Sergej Grigor'evich. Hmel'nickij, 1995. 367 s.
2. Kostogryz S. G. Matematicheskoe modelirovanie predvaritel'nogo smeshhenija v nominal'no nepod-vizhnom frikcionnom kontakte. S. G. Kostogryz, Ja. N. Gladkij. Problemi tribologії. 1996. № 1. S. 5–15.
3. Davydenkov N. N. Izbrannye trudy: v 2-h tomah. N. N. Davydenkov. K.: Naukova dumka, 1981. 24s.
4. Levina Z. M. Kontaktnaja zhestkost' mashin. Z. M. Levina, D. N. Reshetov. Izd. vuzov. Mashinos-troenie. 1971. S.240.
Published
2016-12-27
How to Cite
Костогриз, С., & Мисліборський, В. (2016). Parameter plasticity - the basic criterion for evaluation of elastic-plastic properties of construction materials. Problems of Tribology, 82(4), 94. Retrieved from http://tribology.khnu.km.ua/index.php/ProbTrib/article/view/89
Section
Articles

Most read articles by the same author(s)