TY - JOUR AU - Buryak, V.G. AU - Buryak, A.V. AU - Buryak, V.V. PY - 2019/07/29 Y2 - 2024/03/29 TI - Formation of the characteristics of the energy state in the local contact of the processing and tool materials in the cutting process JF - Problems of Tribology JA - PT VL - 24 IS - 2/92 SE - Articles DO - 10.31891/2079-1372-2019-92-2-42-47 UR - https://tribology.khnu.km.ua/index.php/ProbTrib/article/view/714 SP - 42-47 AB - <p>The formation of characteristics of the energy state in the local contact of machined and tool materials in the cutting process is performed. The adoption of a model of the choice of unit microniveness in the form of a straight truncated cone is substantiated. The rate of deformation of the machined material on of unit microniveness is determined. The probability of the presence of acoustic oscillation and wave processes that occur in the conventional shear plane during the cutting process is shown. The dependence of the magnitude of unit microniveness area on the roughness parameters is established. Analyzing the dimensions of microniveness, and also taking into account the calculated data of the autocorrelation function of the structural and energy state of the working surfaces of the cutting plates, which in microniveness there is a certain amount of grain of the solid base of the material of the cutting plates. The functional dependences of the conditional number of grains on the size of roughness parameters as well as on the average grain size are established. The obtained research results are the initial data when using the methodology of performance evaluation of cutting tools by analyzing the acoustic characteristics of the energy state of processing and instrumental materials using the differential equation of cause and effect relationship</p> ER -