Pokhmursky V.V., Vynar V.A., Vasyliv Kh. B., Zakiev V.I., Ratska N.B. Peculiarities microstrain of surface layers and mechanisms wear α-titanium under the influence of hydrogen.
Abstract
The peculiarities of surface layers microdamage and mechanisms of wear of titanium BT1-0 after electrolytic hydrogenation has been investigated. The concentration of hydrogen in the surface layers of titanium after hydrogenation at current density 1 A/dm2 during 1 h corresponding equilibrium, and at 2 A/dm2 exceeds the 1.5 times due to the formation of hydride phases (TiH2 ). Internal stress in the crystal lattice of titanium after hydrogenation increased by 19 %, leading to an increase in microhardness by 20 % and modulus by 15 %. At the same time significantly (by 40 %) reduced the volume of material recovery work after the elastic deformation and de 6 % - after the plastic deformation. Reduction of elastic-plastic deformation work leads to reducing friction coefficient of titaqnium in 2 ... 3 times compared with the initial state. Wear occurs due to cracking and brittle fracture of surface layers. The plastic deformation of microasperities dominates after abrasion of hydrogenated layer.References
1. Berkovich I.I., Gromakovskij D.G. Tribologija. Fizicheskie osnovy, mehanika i tehnicheskie prilozhenija. Samara, Samar. gos. tehn. un-t., 2000. 268 p.
2. Jones J.W., Wert J.J. The effects of gaseous environments on the wear of commercial purity titanium . Wear. No 32 .1975. pp. 363-377.
3. Fromm E., Gebhardt E. Gazy i uglerod v metallah. M. Metallurgija, 1980. 711 p.
4. Birnbaum H.K. Mechanical properties of metal hydrides. J. Less Common Metals. No 104. 1984. pp. 31-41.
5. Golovin Ju.I. Nanoindentirovanie i mehanicheskie svojstva tverdyh tel v submikroob"emah, tonkih pripoverhnostnyh slojah i plenkah (obzor). Fizika tverdogo tela. 2008. T.50.Vyp.12. pp. 2116-2142.
6. Golovin Ju.I. Nanoindentirovanie i ego vozmozhnosti. M.Mashinostroenie, 2009, 312 p.
7. Blau, P. J., Lab Handbook of Scratch Testing, Chapter 7, Scratch Adhesion Testing, Blue Rock Technical Publ., Oak Ridge, TN, 2002, pp. 7.1-7.15.
8. Goldfajn V.I., Zuev A.M., Klabukov A.G., Lukina V.P.Vlijanie okislenija i navodorazhivanija na trenie i iznos titanovyh splavov. V sb. A.A. Poljakov, D.N.Garkunov Vodorodnyj iznos v uzlah trenija, M. Nauka, 1977, pp. 71-80.
2. Jones J.W., Wert J.J. The effects of gaseous environments on the wear of commercial purity titanium . Wear. No 32 .1975. pp. 363-377.
3. Fromm E., Gebhardt E. Gazy i uglerod v metallah. M. Metallurgija, 1980. 711 p.
4. Birnbaum H.K. Mechanical properties of metal hydrides. J. Less Common Metals. No 104. 1984. pp. 31-41.
5. Golovin Ju.I. Nanoindentirovanie i mehanicheskie svojstva tverdyh tel v submikroob"emah, tonkih pripoverhnostnyh slojah i plenkah (obzor). Fizika tverdogo tela. 2008. T.50.Vyp.12. pp. 2116-2142.
6. Golovin Ju.I. Nanoindentirovanie i ego vozmozhnosti. M.Mashinostroenie, 2009, 312 p.
7. Blau, P. J., Lab Handbook of Scratch Testing, Chapter 7, Scratch Adhesion Testing, Blue Rock Technical Publ., Oak Ridge, TN, 2002, pp. 7.1-7.15.
8. Goldfajn V.I., Zuev A.M., Klabukov A.G., Lukina V.P.Vlijanie okislenija i navodorazhivanija na trenie i iznos titanovyh splavov. V sb. A.A. Poljakov, D.N.Garkunov Vodorodnyj iznos v uzlah trenija, M. Nauka, 1977, pp. 71-80.
Downloads
Published
2014-07-10
How to Cite
Похмурський, В., Винар, В., Василів, Х., Закієв, В., & Рацька, Н. (2014). Pokhmursky V.V., Vynar V.A., Vasyliv Kh. B., Zakiev V.I., Ratska N.B. Peculiarities microstrain of surface layers and mechanisms wear α-titanium under the influence of hydrogen. Problems of Tribology, 68(2), 21–26. Retrieved from https://tribology.khnu.km.ua/index.php/ProbTrib/article/view/127
Issue
Section
Articles
