The influence of friction on tribocontact parameters slideways process equipment.

  • О.В. Диха
  • В.П. Вельбой
  • А.А. Вичавка

Abstract

For analysis of wear resistance of slideways in the slide mechanism of the crank press is the necessity of determining the inbred load to the rails as the basic determining factor of the process of wear. As a result, the analytical power analysis of the crank mechanism of the press with the force of friction in the joints and the flat elements of the mechanism. The calculated dependences for determination of contact loads and shows a sample implementation of method of calculation.

References

1. VAT Presmash - Mashinobuduvannya ta obladnannya . ukrbiz.info/ua/listing.php.
2. KompanIya DIP-Metaloobrobka. www.deep-m.com.ua.
3. TOV "RM-SM" . mapia.ua/ua/kyiv/metalurgiya/tov.
4. Zhivov L.I., Ovchinnikov A.G. Kuznechno-shtampovochnoe oborudovanie. Pressyi. Harkov: Izd-vo pri Harkov. un-te 1966. 456 p.
5. Zhivov L.I., Ovchinnikov A.G., Skladchikov E.N. Kuznechno-shtampovochnoe oborudovanie: Uchebnik dlya vuzov. Pod red. L.I. Zhivova. M.:Izd-vo MGTU im. N.E. Baumana, 2006. 560 p.
6. Ignatov A. A., Ignatova T. A. Krivoshipnyie goryacheshtampovochnyie pressyi. M. Mashino-stroenie, 1974. 352 p.
7. Spravochnik konstruktora shtampov: Listovaya shtampovka. Pod obsch. red. L. I. Rudmana. M.: Mashinostroenie, 1988. 496 p.
8 Rozrahunok robochih detaley shtampIv listovogo shtampuvannya z urahuvannyam stupenyu Yih znosu. Zb. "Problemi tribologii", 2010, No 3.
9. KInitskiy Ya. T. TeorIya mehanizmiv i mashin. K.: Naukova dumka, 2002. 360 p.
10. Kovka i shtampovka: Spravochnik: V 4 t. T. 4 Listovaya shtapovka. Pod red. D. Matveeva. M.: Mashinostroenie, 1987. 544 p.
Published
2016-12-23
How to Cite
Диха, О., Вельбой, В., & Вичавка, А. (2016). The influence of friction on tribocontact parameters slideways process equipment. Problems of Tribology, 82(4), 24. Retrieved from https://tribology.khnu.km.ua/index.php/ProbTrib/article/view/17
Section
Articles

Most read articles by the same author(s)

1 2 > >>