Analysis of the influence of surface plastic deformation on increasing the wear resistance of machine parts
DOI:
https://doi.org/10.31891/2079-1372-2020-96-2-6-11Keywords:
deformation, wear resistance, plastic deformation, hardening, roller, deviceAbstract
The article provides a review of information materials on the effectiveness of surface plastic deformation in order to increase the wear resistance of friction pairs. The analysis revealed that the increase in the wear resistance of parts by surface plastic deformation is significantly affected by the stabilization of the rolling forces, as well as the values of the optimal modes of rolling parts by rollers
References
1. Papshev D.D. Uprochnenie detalej obkatkoj sharikami / D.D. Papshev. – M.: Mashinostroenie. – 1968. – 132 s.
2. Babej Ju.I. Poverhnostnoe uprochnenie metallov / Ju.I. Babej, B.I. Butakov, V.G. Sysoev. – Kiev: Nauk. dumka, 1995. – 256 s.
3. Butakov B.I. Usovershenstvovanie processa chistovogo obkatyvanija detalej rolikami / B.I. Butakov // Vestnik mashinostroenija. – 1984. – № 7. – S. 50 – 53.
4. Shnejder Ju.G. Chistovaja obrabotka metallov davleniem / Ju.G. Shnejder. – M.: Mashinostroenie, 1963. – 272 s.
5. Balter M.A. Uprochnenie detalej mashin / M.A. Balter. – M.: Mashinostroenie, 1978. – 184 s.
6. Odincov L.G. Uprochnenie i otdelka detalej poverhnostnym plasticheskim deformirovaniem / L.G. Odincov. – M.: Mashinostroenie, 1987. – 328 s.
7. Konovalov E.G. Osnovy novyh sposobov metalloobrabotki / E.G. Konovalov. – Minsk: Iz – vo AN BSSR, 1961. – 185 s.
8. Braslavskij V.M. Volnistost' poverhnosti pri obkatke rolikami / V.M. Braslavskij // Stanki i instrument. – 1960. – № 6 – S. 15 –20.
9. Shkol'nik L.M. Tehnologija i prisposoblenija dlja uprochnenija i otdelki detalej nakatyvaniem / L.M. Shkol'nik, V.I. Shahov. – M.: Mashinostroenie. – 1964. – 184 s.
10. Marchenko D.D. Improving the contact strength of V-belt pulleys using plastic deformation / D.D. Marchenko, K.S. Matvyeyeva // Problems of Tribology. – Khmelnitsky, 2019. – Vol 24. – No 4/94 (2019) – S. 49–53. DOI: https://doi.org/10.31891/2079-1372-2019-94-4-49-53.
11. Zubiekhina-Khaiiat A.V. Mathematical modeling of the process of rolling body rolls with needed rollers / A.V. Zubiekhina-Khaiiat, D.D. Marchenko // Problems of Tribology. – Khmelnitsky, 2019. – Vol. 24. – No 3/93 (2019) – S. 45–50. DOI: https://doi.org/10.31891/2079-1372-2019-93-3-45-50.
12. Kuz'menko A. G. Zakonomernosti proskal'zyvanija pri vnutrennem i naruzhnom kachenii cilindrov. Jeksperiment (Chast' 1) / A. G. Kuz'menko // Problemi tribologії. – Hmel'nic'kij, 2012. – № 2. – S. 121–126.
13. Marchenko D.D. Investigation of wear of a contact pair of friction "rope block - rope" / D.D. Marchenko // Problems of Tribology. – Khmelnitsky, 2019. – Vol 24. – No 2/92 (2019) – S. 82–87. DOI: https://doi.org/10.31891/2079-1372-2019-92-2-82-87.
2. Babej Ju.I. Poverhnostnoe uprochnenie metallov / Ju.I. Babej, B.I. Butakov, V.G. Sysoev. – Kiev: Nauk. dumka, 1995. – 256 s.
3. Butakov B.I. Usovershenstvovanie processa chistovogo obkatyvanija detalej rolikami / B.I. Butakov // Vestnik mashinostroenija. – 1984. – № 7. – S. 50 – 53.
4. Shnejder Ju.G. Chistovaja obrabotka metallov davleniem / Ju.G. Shnejder. – M.: Mashinostroenie, 1963. – 272 s.
5. Balter M.A. Uprochnenie detalej mashin / M.A. Balter. – M.: Mashinostroenie, 1978. – 184 s.
6. Odincov L.G. Uprochnenie i otdelka detalej poverhnostnym plasticheskim deformirovaniem / L.G. Odincov. – M.: Mashinostroenie, 1987. – 328 s.
7. Konovalov E.G. Osnovy novyh sposobov metalloobrabotki / E.G. Konovalov. – Minsk: Iz – vo AN BSSR, 1961. – 185 s.
8. Braslavskij V.M. Volnistost' poverhnosti pri obkatke rolikami / V.M. Braslavskij // Stanki i instrument. – 1960. – № 6 – S. 15 –20.
9. Shkol'nik L.M. Tehnologija i prisposoblenija dlja uprochnenija i otdelki detalej nakatyvaniem / L.M. Shkol'nik, V.I. Shahov. – M.: Mashinostroenie. – 1964. – 184 s.
10. Marchenko D.D. Improving the contact strength of V-belt pulleys using plastic deformation / D.D. Marchenko, K.S. Matvyeyeva // Problems of Tribology. – Khmelnitsky, 2019. – Vol 24. – No 4/94 (2019) – S. 49–53. DOI: https://doi.org/10.31891/2079-1372-2019-94-4-49-53.
11. Zubiekhina-Khaiiat A.V. Mathematical modeling of the process of rolling body rolls with needed rollers / A.V. Zubiekhina-Khaiiat, D.D. Marchenko // Problems of Tribology. – Khmelnitsky, 2019. – Vol. 24. – No 3/93 (2019) – S. 45–50. DOI: https://doi.org/10.31891/2079-1372-2019-93-3-45-50.
12. Kuz'menko A. G. Zakonomernosti proskal'zyvanija pri vnutrennem i naruzhnom kachenii cilindrov. Jeksperiment (Chast' 1) / A. G. Kuz'menko // Problemi tribologії. – Hmel'nic'kij, 2012. – № 2. – S. 121–126.
13. Marchenko D.D. Investigation of wear of a contact pair of friction "rope block - rope" / D.D. Marchenko // Problems of Tribology. – Khmelnitsky, 2019. – Vol 24. – No 2/92 (2019) – S. 82–87. DOI: https://doi.org/10.31891/2079-1372-2019-92-2-82-87.
Downloads
Published
2020-05-30
How to Cite
Marchenko, D., Artyukh, V., & Matvyeyeva, K. (2020). Analysis of the influence of surface plastic deformation on increasing the wear resistance of machine parts. Problems of Tribology, 25(2/96), 6–11. https://doi.org/10.31891/2079-1372-2020-96-2-6-11
Issue
Section
Articles
