Hardening of the working tools of equipment for manufacturing fuel briquettes and pellets

  • Д.Л. Луцак
  • О.В. Пилипченко
  • М.Й. Бурда

Abstract

The article describes the list of factors experienced by working tools of equipment for manufacturing wood bri-quettes and pellets during exploitation, scheme of frictional interaction in pair of «pressed sawdust -steel» and a list of mate-rials and technologies used for hardfacing of the working tools of the mentioned equipment. The authors offer to apply acety-lene-oxygen method of coating «relit» on the working surfaces for more effective protection of quick-wear parts of briquet-ting presses, including screw extruders. Those coatings are characterized with high wear resistance against strong abrasive ef-fect

References

1. Morozova G.A, Trofimova T.V. Jekonomicheskaja ocenka racional'nogo ispol'zovanija vtorichnyh resursov. Vestnik Nizhegorodskogo gosudarstvennogo universiteta im. Lobachev-skogo. 2012. № 2. S. 214-218.
2. Vysockij S.P., Ajrapetjan , K.V. Ispol'zovanie biologicheskih resursov dlja poluchenija jenergii. Tez. 4-j Mezhdunarodnoj konferencii "Strategija kachestva v promyshlennosti i obrazovanii". .– Bolgarija, Varna, 2010. .– S. 88-91.
3. Pamfilov E.A., Prozorov Ja.S. Iznashivanie detalej iz zhelezouglerodistyh splavov pri frikcionnom kon-takte s drevesinoj. Sistemy. Metody. Tehnologii. 2012. №1 (13). S. 49-53
4. Zotov G..A., Pamfilov E.A. Povyshenie stojkosti derevorezhushhego instrumenta. M.: Jekologija. 1991. 304 s.
5. Porankiewicz B., Sandak J., Tanaka C. Factors influencing steel tool wear when milling wood. Wood Science & Technology. 2005. № 39(3). P. 225-234.
6. Pamfilov E.A., Petrenko M.N. Some issues of tools hydrogen wear. Dol-govechnost’ trushchikhsya detaley mashin: sb.st. 1986. № 1. P. 148-153.
7. Troshin A. G., MoiseevV.F. , Tel'nov I.A. Razvitie processov i oborudovanija dlja proizvodstva toplivnyh briketov iz biomassy. Vostochno-Evropejskij zhurnal peredovyh teh-nologij. 2010. № 3(45). S. 36-40.
8. Gomonaj, V. M. Proizvodstvo toplivnyh briketov. Drevesnoe syr'e, oborudovanie, tehnolo-gii, rezhimy raboty: ucheb. M. : GOU MIO MGUL. 2006. 68 s.
9. Juzvenko Ju.A., ZhudraA.P., Frumin E.I. Abrazivnyj iznos kompozicionnyh splavov. Avtomaticheskaja svarka. 1973. № 7. S. 62-63.
10. Belyj A.I. Iznosostojkost' i prochnost' karbidov WC-W2C, poluchennyh razlichnymi spo-sobami. Avtomaticheskaja svarka. 2010. № 12. S. 20-23.
11. Burda M.J., LucakD.L., Burda Ju. M. Metodika і pristrіj dlja doslіdzhennja materіalіv na abrazivne znoshuvannja. Іntelektual'nij produkt vchenih, vinahіdnikіv і racіonalіzatorіv Pri-karpattja: kat. persp. vinahodіv, koris. modelej, prom. zrazkіv і rac. propoz. Іvano-Frankіvs'k: [b. v.]. 2010. C. 12-13.
Published
2015-06-27
How to Cite
Луцак, Д., Пилипченко, О., & Бурда, М. (2015). Hardening of the working tools of equipment for manufacturing fuel briquettes and pellets. Problems of Tribology, 76(2), 19-25. Retrieved from http://tribology.khnu.km.ua/index.php/ProbTrib/article/view/422
Section
Articles

Most read articles by the same author(s)