Management of morphology and structure besieged coatings
DOI:
https://doi.org/10.31891/2079-1372-2020-97-3-70-73Keywords:
hardfacing coating, control of structure, austenite, martensite, molten's bath.Abstract
The article investigates structure formation during surfacing of high-carbon coatings. The presence of a functional relationship between the lifetime of the weld pool and the formed structures of the deposited metal has been established. To change the time of existence of the weld pool, it is proposed to use a change in the deposition rate, surfacing modes and other factors. For various modes of existence of the weld pool, the presence of structures where the amount of retained austenite varies within wide limits was revealed. The ability to provide the necessary physical, mechanical and tribological properties has been obtained
References
1. K. Dies., Archiv fur das Eisenhuttenwessen 16, 399 (1973) [English]
2. Kostornov A. G. Sovremennye predstavleniya o mekhanizme treniya i iznosa tribotekhnicheskih sistem i celenapravlenyj sintez kompozicionnyh antifrikcionnyh materialov dlya zadannyh uslovij ekspluatacii / A. G. Kostornov // 4-ya Ukrainskaya konferenciya po kosmicheskim issledovaniyam. Institut kosmicheskih issledovanij NANU-NKAU. 2004. S.17 [Ukrainian]
3. Kragel'skij I. V. Trenie i iznos / I. V. Kragel'skij. – M.: Mashinostroenie, 1968. – 480 s [Ukrainian]
4. Savulyak V. І. Naplavlennya visokovuglecevih znosostіjkih pokrittіv / V. І. Savulyak, V. Y. Shenfel'd. – Vіnnicya: VNTU, 2016. – 124 s [Ukrainian]
5. Popov V.S., Brykov N.N., Dmitrichenko N.S. Iznosostojkost' press–form ogneupornogo proizvodstva. – M.: Metallurgiya, 1971. – 157 s [Ukrainian]
6. CHejlyah A.P. Ekonomnolegirovannye metastabil'nye splavy i uprochnyayushchie tekhnologii. – Har'kov: NNC HFTI, 2003. – 212 s [Ukrainian]
7. Popov S. M. Tribotekhnіchnі ta materіaloznavchі aspekti rujnuvannya stalej і splavіv pri znoshuvannі / S. M. Popov, D. A. Antonyuk, V. V. Netrebko – Zaporіzhzhya: ZNU, VAT «Motor Sіch», 2010, – 368 s.
8. Sorokin V. M. Osnovy tribotekhniki i uprochneniya poverhnostej detalej mashin / V. M. Sorokin, A. S. Kurnikov – N.: Novgorod: VGAVT, 2006 – 296s [Ukrainian]
9. Malinov L. S. Resursosberezhenie za schet primeneniya ekonomnolegirovannyh splavov i uprochnyayushchih tekhnologij, obespechivayushchih poluchenie mnogofaznyh metastabil'nyh struktur i upravlenie strukturnymi i fazovymi prevrashcheniyami / L. S. Malinov, V. L. Malinov // Novі materіali ta tekhnologії v metalurgії ta mashinobuduvannі – 2011. – № 1. - Zaporozh'e. – S. 93-105 [Ukrainian]
10. Tenenbaum M. M. Iznosostojkost' konstrukcionnyh materialov i detalej mashin pri abrazivnom iznashivanii. - M.: Mashinostroenie, 1966. – 332 s [Ukrainian]
11. Savulyak V. І. Naplavlennya visokovuglecevih pokrittіv z vikoristannyam vuglecevih volokon / V. І. Savulyak, S.A. Zabolotnij, V. Y. Shenfel'd // Problemi tribologії. – 2010. – №1. – S.66–70 [Ukrainian]
2. Kostornov A. G. Sovremennye predstavleniya o mekhanizme treniya i iznosa tribotekhnicheskih sistem i celenapravlenyj sintez kompozicionnyh antifrikcionnyh materialov dlya zadannyh uslovij ekspluatacii / A. G. Kostornov // 4-ya Ukrainskaya konferenciya po kosmicheskim issledovaniyam. Institut kosmicheskih issledovanij NANU-NKAU. 2004. S.17 [Ukrainian]
3. Kragel'skij I. V. Trenie i iznos / I. V. Kragel'skij. – M.: Mashinostroenie, 1968. – 480 s [Ukrainian]
4. Savulyak V. І. Naplavlennya visokovuglecevih znosostіjkih pokrittіv / V. І. Savulyak, V. Y. Shenfel'd. – Vіnnicya: VNTU, 2016. – 124 s [Ukrainian]
5. Popov V.S., Brykov N.N., Dmitrichenko N.S. Iznosostojkost' press–form ogneupornogo proizvodstva. – M.: Metallurgiya, 1971. – 157 s [Ukrainian]
6. CHejlyah A.P. Ekonomnolegirovannye metastabil'nye splavy i uprochnyayushchie tekhnologii. – Har'kov: NNC HFTI, 2003. – 212 s [Ukrainian]
7. Popov S. M. Tribotekhnіchnі ta materіaloznavchі aspekti rujnuvannya stalej і splavіv pri znoshuvannі / S. M. Popov, D. A. Antonyuk, V. V. Netrebko – Zaporіzhzhya: ZNU, VAT «Motor Sіch», 2010, – 368 s.
8. Sorokin V. M. Osnovy tribotekhniki i uprochneniya poverhnostej detalej mashin / V. M. Sorokin, A. S. Kurnikov – N.: Novgorod: VGAVT, 2006 – 296s [Ukrainian]
9. Malinov L. S. Resursosberezhenie za schet primeneniya ekonomnolegirovannyh splavov i uprochnyayushchih tekhnologij, obespechivayushchih poluchenie mnogofaznyh metastabil'nyh struktur i upravlenie strukturnymi i fazovymi prevrashcheniyami / L. S. Malinov, V. L. Malinov // Novі materіali ta tekhnologії v metalurgії ta mashinobuduvannі – 2011. – № 1. - Zaporozh'e. – S. 93-105 [Ukrainian]
10. Tenenbaum M. M. Iznosostojkost' konstrukcionnyh materialov i detalej mashin pri abrazivnom iznashivanii. - M.: Mashinostroenie, 1966. – 332 s [Ukrainian]
11. Savulyak V. І. Naplavlennya visokovuglecevih pokrittіv z vikoristannyam vuglecevih volokon / V. І. Savulyak, S.A. Zabolotnij, V. Y. Shenfel'd // Problemi tribologії. – 2010. – №1. – S.66–70 [Ukrainian]
Downloads
Published
2020-09-28
How to Cite
Savulyak, V., Shenfeld, V., Shylina, O., & Vishtak, I. (2020). Management of morphology and structure besieged coatings. Problems of Tribology, 25(3/97), 70–73. https://doi.org/10.31891/2079-1372-2020-97-3-70-73
Issue
Section
Articles
