Establishing the regularity of wear of a cylindrical brush of the mounted sweeping equipment of a garbage truck depending on its rotation frequency

Authors

  • O.V. Bereziuk Vinnitsa National Technical University
  • V.I. Savulyak Vinnitsa National Technical University
  • V.O. Kharzhevskyi Khmelnytskyi National University
  • N.S. Semichasnova Vinnitsa National Technical University
  • E.S. Harbuz Vinnitsa National Technical University

DOI:

https://doi.org/10.31891/2079-1372-2024-112-2-31-36

Keywords:

wear, rotation frequency, mounted sweeping equipment, cylindrical brush, garbage truck, regularity, regression analysis

Abstract

The article is dedicated to establishing the regularity of wear of a cylindrical brush of the mounted sweeping equipment of a garbage truck depending on its rotation frequency. Using the mathematical dependencies and corresponding regression analysis programs, it was established a power law of change in the wear of the cylindrical brush of the garbage truck's mounted sweeping equipment on the frequency of its rotation, which can be used to build a mathematical model of the hydraulic drive of the improved mounted sweeping equipment of a garbage truck, taking into account the wear of its working bodies. A graphical dependence of the change in the wear of the cylindrical brush of the garbage truck's mounted sweeping equipment on its rotation frequency was plotted, which confirmed the sufficient convergence of the obtained regularity. The graph of the influence of the rotation frequency of the cylindrical brush of the garbage truck's mounted sweeping equipment on its wear demonstrates the expediency of its reduction. It has been established that for a Ukrainian-made sweeping machine of the serial model KO-713-01, which is equipped with a cylindrical brush with a rotation speed of 3200 rpm, its wear according to the obtained regularity will reach 86.5 mm. It was found that reducing the rotational speed of the cylindrical brush of the garbage truck's mounted sweeping equipment from 62 sec-1 (3700 rpm) to 26...38 sec-1 (1550...2250 rpm) leads to a decrease in its wear by 2 orders of magnitude. The expediency of conducting additional research to identify further ways to improve the wear resistance of the cylindrical brush of the garbage truck's mounted sweeping equipment has been established.

References

Khomenko IM, Kindrachuk MV, Kobrynets AK (2010) Hranychnodopustymyi znos mashyn [Limitations of wear of machines]. Problems of friction and wear, 52, 28-37.

Dykha O.V.(2018) Rozrahunkovo-eksperymental'ni metody keruvannja procesamy granychnogo zmashhuvannja tehnichnyh trybosystem [Computational and experimental methods of controlling processes of boundary lubrication of technical tribosystems]: monograph. Khmelnytskyi: KhNU

Ministry of Development of Communities and Territories of Ukraine (2016) Stan sfery povodzhennia z pobutovymy vidkhodamy v Ukraini za 2015 rik [The state of household waste management in Ukraine in 2015]. URL: https://www.minregion.gov.ua/wp-content/uploads/2016/04/Zbortpv4-oblasti1.pdf.

Ministry of Development of Communities and Territories of Ukraine (2021) Stan sfery povodzhennia z pobutovymy vidkhodamy v Ukraini za 2020 rik [State of household waste management in Ukraine in 2020]. URL: https://www.minregion.gov.ua/wp-content/uploads/2021/06/rozdil-4-2020_oblasti.pdf

The Cabinet of Ministers of Ukraine (2004) Resolution No. 265 “Pro zatverdzhennia Prohramy povodzhennia z tverdymy pobutovymy vidkhodamy” [“On Approval of the Program for Solid Waste Management”]. URL: http://zakon1.rada.gov.ua/laws/show/265-2004-%D0%BF.

Ivanchenko G.M., Lyutikov A.A., Cherednichenko P.P. (2015). Utrymannia vulychno-dorozhnoi merezhi mista [Maintenance of the city street and road network]. Urban Planning and Spatial Planning, 55, 174-177.

Priymachenko O.V. (2008) Metody vdoskonalennia tekhnolohii ochyshchennia dorozhnoho pokryttia [Methods of improving the technology of road surface cleaning]. Urban Planning and Spatial Planning, 29, 265-270.

Nalobina OO, Bundza OZ, Holotiuk MV, Puts VS, Martyniuk VL (2022) Kontseptualne kompleksne otsiniuvannia efektyvnosti vykorystannia komunalnykh mashyn [Conceptual comprehensive assessment of the efficiency of municipal machines]. Scientific Notes, 73, 222-227.

Wahab M.A., Parker G., Wang C. (2007) Modeling rotary sweeping brushes and analyzing brush characteristic using finite element method. Finite Elements in Analysis and Design, 43(6-7), 521-532.

Xu Y., Ma T., Kong L., Zhao J., Li Y. (2023) Wear and Leakage Behaviors of Brush Seal Considering Eccentricity and Radial Deformation. Energies, 16(8), 3394.

Lepesh A.G., Lepesh G.V., Vorontsov I.I. (2011) The method of experimental determination of the durability of the brush pile and communal cleaning equipment. Technical and technological problems of service, 16(2), 7-19.

Tsekhosh S.I., Ignatov S.D., Demidenko A.I., Kvasov I.N. (2020) Increasing the life of the brush working equipment of a utility vehicle by using a device to control its position. Journal of Physics: Conference Series. IV International Scientific and Technical Conference "Mechanical Science and Technology Update", MSTU 2020. P. 012143.

Bereziuk O.V., Savulyak V.I., Kharzhevskyi V.O. (2022) Dynamics of wear and tear of garbage trucks in Khmelnytskyi region. Problems of Tribology, 27(3/105), 70-75.

Bereziuk O.V., Savulyak V.I., Kharzhevskyi V.O. (2021) The influence of auger wear on the parameters of the dehydration process of solid waste in the garbage truck. Problems of Tribology, 26(2/100), 7986 .

Bereziuk O.V., Savulyak V.I., Kharzhevskyi V.O., Harbuz Ye.S. (2023) Determination of the dependencies of the wear influence of the cylindrical brush on the operational characteristics of the garbage truck's mounted sweeping equipment. Problems of Tribology, 28(4/110), 22-27.

Downloads

Published

2024-06-18

How to Cite

Bereziuk, O., Savulyak, V., Kharzhevskyi, V., Semichasnova, N., & Harbuz, E. (2024). Establishing the regularity of wear of a cylindrical brush of the mounted sweeping equipment of a garbage truck depending on its rotation frequency. Problems of Tribology, 29(2/112), 31–36. https://doi.org/10.31891/2079-1372-2024-112-2-31-36

Issue

Section

Articles

Most read articles by the same author(s)

1 2 > >>