Strengthening of tribocoupling parts of transport and agricultural machines with fullerene materials
DOI:
https://doi.org/10.31891/2079-1372-2025-115-1-116-121Keywords:
transport vehicles, agricultural machinery, parts, fulleroid modifiers, polymer matrixAbstract
The aim of this work is a comparative study of tribological properties and tribotechnical characteristics of polymer nanocomposites based on polyamide 6, modified with nanosized fillers. The work investigates polyamide 6 as a matrix modified with the following fillers: fulleroid materials (carbon fibers), microsized fillers containing nanoparticles (fullerene carbon black), nanoparticle fillers (fullerene C60).The influence of fulleroid modifiers and carbon fibers on the tribological properties of samples and parts made of polymer nanocomposites based on thermoplastic (polyamide 6) polymer matrices was studied. It was shown that the introduction of fulleroid modifiers allows to significantly reduce the friction coefficient of polymer compositions while increasing their mechanical characteristics. It was found that the use of carbon fibers for modification of polyamide 6 with an increase in mechanical characteristics during operation leads to an increase in the friction coefficient of the conjugated steel sample by more than two times compared to the original polymer matrix.
References
Treacy, M. M. J., Ebesen, T. W., & Gibson, J. M. (1996). Nanoparticles as reinforced agents. Nature (London), 381, 678–680. http://dx.doi.org/10.1038/381678a0
Mai, Y.-W., & Yu, Z.-Z. (2006). Polymer nanocomposites. CRC Press.
Naffakh, M., Diez-Pascual, A. M., Marco, C., Ellis, G. J., & Gomez-Fatou, M. A. (2013). Opportunities and challenges in the use of inorganic fullerene-like nanoparticles to produce advanced polymer nanocomposites. Progress in Polymer Science, 38, 1163–1231. http://dx.doi.org/10.1016/j.progpolymsci.2013.04.001
Aulin, V., Lysenko, S., Hrynkiv, A., & Pashynskyi, M. (2022). Improvement of tribological characteristics of coupling parts "shaft-sleeve" with polymer and polymer-composite materials. Problems of Tribology, 27(3/105), 96–107.
Berladir, Kh. V., Budnyk, O. A., Dyadiura, K. O., et al. (2017). Scientific foundations for the development of polymer composite materials for tribotechnical purposes based on polytetrafluoroethylene (K. O. Dyadiura, Ed.). Sumy State University.
Schaefer, D. W., & Justice, R. S. (2007). How nano are nanocomposites? Macromolecules, 40(24), 8501–8517. http://dx.doi.org/10.1021/ma070356w
Aulin, V., Lysenko, S., Hrynkiv, A., Tykhyi, A., Kuzyk, O., & Livitskyi, O. (2023). The regularity of the change in the coefficient of friction of the coupling of "shaft-sleeve" parts using polymeric materials. Problems of Tribology, 28(1/107), 81–91.
Aulin, V., Lysenko, S., Hrynkiv, A., Derkach, O., & Makarenko, D. (2022). Influence of high-modulus filler content on critical load on tribocouples made of microheterophase polymer composite materials. Problems of Tribology, 27(2/104), 71–79.
Bijwe, J., Logani, C. M., & Tewati, U. S. (1990). Influence of fillers and fiber reinforcement on abrasive wear resistance of some polymeric composites. Wear, 138(1), 77–92. http://dx.doi.org/10.1016/0043-1648(90)90169-b
Buketov, A. V., et al. (2018). Restoration of transport means using fullerene-containing epoxy composites (Text). Kherson State Maritime Academy.
Tomina, A.-M., Burya, O., Lytvynova, Y., & Gavrish, V. (2020). The research on the influence of titanium-tantalum-tungsten-cobalt hard alloy on the tribological properties of phenylone C-2. Problems of Tribology, 25(2/96), 42–48.
Tarnavskyi, A. (2018). Changes in thermophysical properties of polyamide-6 under the influence of functionally active polymer. Bulletin of Lviv State University of Life Safety, 8, 184–189.
Friedrich, K. (2018). Polymer composites for tribological applications. Advanced Industrial and Engineering Polymer Research, 148, 3–39. http://dx.doi.org/10.1016/j.aiepr.2018.05.001
Hosseini, M., & Makhlouf, A. S. H. (2016). Industrial applications for intelligent polymers and coatings. Springer International Publishing.
Pan, B. L., Zhao, J., Zhang, Y. Q., & Zhang, Y. Z. (2012). Wear performance and mechanisms of polyphenylene sulfide/polytetrafluoroethylene wax composite coatings reinforced by graphene. Journal of Macromolecular Science, Part B, 51(6), 1218–1227. http://dx.doi.org/10.1080/00222348.2011.627821
