Optimization of the technology for applying discrete coatings in restoration of bronze parts by electrospark alloying
DOI:
https://doi.org/10.31891/2079-1372-2023-107-1-51-58Keywords:
electrospark alloying, discrete coatings, bronze parts, multicriteria optimization, tribotechnical characteristics, design and technological factorsAbstract
In this work, a multicriteria optimization of the technology for applying discrete coatings by electrospark alloying in the restoration of bronze parts is carried out. As criteria for optimizing the process of electrospark alloying, tribotechnical characteristics were chosen – the wear intensity and friction coefficient of the coating. As adjustable parameters, those design, technological and operational factors that have the greatest influence on the value of optimization criteria are used: coating material; lubricant; operating current; amplitude of electrode oscillations; sliding speed; specific load. As a result of experimental studies, experimental dependences of wear intensity and friction coefficient for various coating materials, sliding speeds and lubrication conditions were obtained. The use of multicriteria optimization of the electrospark alloying technology made it possible to obtain various alternative coating options and technological parameters of their application for various operating conditions. Of the studied coatings, the most effective is a two-layer coating with the first layer SP-2 and an outer layer of the base material bronze BrAZhMts 10-3-1.5, which is explained by the formation of wear-resistant areas based on Mn and Ni. Multiparametric optimization of the electrospark alloying technology made it possible to reveal a combination of structural and technological factors that ensure the formation of discrete coatings with high operational properties in the restoration of bronze parts.
References
Kelemesh, A., Gorbenko, O., Dudnikov, A., Dudnikov, I. (2017). Research of wear resistance of bronze bushings during plastic vibration deformation. Eastern-European Journal of Enterprise Technologies. Vol. 2, No. 11 (86). рр. 16-21. doi:10.15587/1729-4061.2017.97534.
Shepelenko I. Restoration of bronze bushes by the method of surface plastic deformation/ I. Shepelenko, Warouma Arifa, V. Sherkun// International Journal of Engineering &Technology, 5 (2016), pp.29–32. https://doi.org/10.14419/ijet.v5i1.5651
Kropivnyj V.N., Shepelenko I.V., Cigankova L.I. (2005). Perspektivi vikoristannya difuzijnoyi metalizaciyi dlya vidnovlennya bronzovih vtulok [Zbirnik naukovih prac «Tehnika v silskogospodarskomu virobnictvi, galuzeve mashinobuduvannya, avtomatizaciya» Vip.16] S. 196-198.
Lyashenko B.A, Ermolaev V.V., Mirnenko V.I. (1997). Elektroiskrovoe legirovanie, kak perspektivnyj metod vosstanovleniya detalej aviacionnoj tehniki [Materialy seminara «Tehnologiya i instrument iz STM v avtomobilnoj i aviacionnoj promyshlennosti»] S.30-31.
Lyashenko B.A., Novikov N.V., Klimenko S.A. (2017). Diskretnoe modifitsirovanie poverhnostnogo sloya detaley mashin i instrumentov. Kiev, ISM im. V.N.Bakulya, 264 s.
Lyashenko B.A., Solovyih E.K., Mirnenko V.I. i dr. (2010). Optimizatsiya tehnologii naneseniya pokryitiy po kriteriyam prochnosti i iznosostoykosti. Kiev, NAN Ukrainyi, IPP im. G.S. Pisarenko, 193 s.
Solovyih E.K. (2012). Tendentsii razvitiya tehnologiy poverhnostnogo uprochneniya v mashinostroenii. Kirovograd, KOD, 92 s.
Shepelenko I.V. (2003). Udoskonalennya procesu obrobki shatunnih vtulok poverhnevim plastichnim deformuvannyam pri yih vidnovlenni [Avtoreferat disertaciyi kandidata tehnichnih nauk] 17 s.
Kropivnij V.M., Shepelenko I.V., Kulyeshkov Yu.V. (2005). Doslidzhennya mehanichnih vlastivostej bronzi pislya vibrorozkochuvannya i deformuyuchogo protyaguvannya [Zbirnik naukovih prac «Tehnika v silskogospodarskomu virobnictvi, galuzeve mashinobuduvannya, avtomatizaciya» Vip. 16] –S. 96-99.
Solovih E.K. (2013). Naukovo-metodologichni osnovi pidvishennya nesuchoyi zdatnosti funkcionalnih pokrittiv konstruktivnimi i tehnologichnimi metodami [Avtoreferat dysertatsii doktora tekhnichnykh nauk] 36 s.
Sushko O.V., Posvyatenko E.K., Kyurchev S.V. i dr. (2019). Prikladne materialoznavstvo. Melitopol, TOV «Forward press», 352 s.
Shepelenko I.V., Dryeyev O.M., Budar Mohamed R.F. (2020). Viznachennya yakosti metalevih pokrittiv [Materiali Mizhnarodnoyi naukovo-praktichnoyi konferenciyi «Molod i tehnichnij progres v APK». Innovacijni rozrobki v agrarnij sferi. Tom 2. Harkiv] S.298-299.
Solovyh E.K. (2010). Vybor alternativnyh tehnologij naneseniya iznosostojkih pokrytij diskretnoj struktury [Zbirnik naukovih prac «Tehnika v silskogospodarskomu virobnictvi, galuzeve mashinobuduvannya, avtomatizaciya» Vip.23] S.236-239.
Solovyh E.K., Kapishon L.S. (2012). Alternativnye tehnologii diskretnyh pokrytij [Materialy nauchno-tehnicheskogo seminara «Sovremennye problemy proizvodstva i remonta v promyshlennosti i na transporte». Svalyavy] S.239-240.
Lyashenko B.A., Mirnenko V.I., Solovyh E.K. (2007). O zamene bronzy v oporah skolzheniya na alyuminievye splavy s diskretnymi pokrytiyami [Naukovo-tehnichnij zbirnik «Problemi tertya ta znoshuvannya». T.48] S. 149-159.
