Physical and chemical processes in the application of antifriction coatings by the friction-mechanical method
DOI:
https://doi.org/10.31891/2079-1372-2025-115-1-66-73Keywords:
finishing antifriction non-abrasive treatment, physical model, antifriction coating, process medium, surface activation, tribodestruction, wear resistanceAbstract
The current models of antifriction coating formation by finishing antifriction non-abrasive treatment has shown the lack of a thorough analysis of physical and chemical processes occurring in the friction zone. From this point of view, it seems reasonable to study the process of coating formation at the stages of surface activation, deposition of antifriction components and formation of an antifriction coating. The considered characteristic structures for each of the stages of antifriction coating application and chemical reactions that occur during the formation of an antifriction coating allow us to track the processes accompanying the formation of coatings and identify ways to improve them. It is proved that the quality of coating formation directly depends on the material of the part and tool, temperature in the deposition zone, material diffusion rate, and dissociation of chemical compounds. A physical model of the process of finishing antifriction treatment is proposed, which determines the chemical reactions and physical processes occurring at different stages of the coating formation. The analysis of the model allows to find out the characteristic phenomena in the system ‘part – tool – technological environment’, and to influence the quality of the formation of an antifriction coating by the friction-mechanical method.
References
Solovykh, E.K. (2012). Trends in the development of surface hardening technologies in mechanical engineering. Kirovohrad, KOD, 92 p.
Kosiuk, M.M., Kostiuk, S.A., Kostiuk, M.A. (2018). Technological support for the application of antifriction coating on incomplete spherical surfaces by friction-mechanical method. Bulletin of Khmelnytsky National University. Technical sciences. No. 4. 38-42.
Abdullah Rasheed A, Ihor Shepelenko, Eduard Posviatyenko (2020). Experimental quality improvement of the application of antifriction coating. First International Conference on Advances in Physical Sciences and Materials 13-14 August 2020, Coimbatore, India. Journal of Physics: Conference Series, Vol. 1706. 1-11. https://iopscience.iop.org/article/10.1088/1742-6596/1706/1/012187.
Gottlieb Polzer (1981). Erhöhung der Verschleißfestigkeit auf der Grundlage der selektiven Übertragung. 192 p.
Shepelenko, I., Nemyrovskyi, Y., Tsekhanov, Y., Mahopets, S., Bevz, O. (2020). Peculiarities of interaction of micro-roughnesses of contacting surfaces at FANT. In: Ivanov, V., Trojanowska, J., Pavlenko, I., Zajac, J., Peraković, D. (eds.) DSMIE 2020. LNME, 452-461. https://doi.org/10.1007/978-3-030-50794-7_44.
J. Schöfer et. al. (2001). Formation of Tribochemical Films and White Layers on Self-Mated Bearing Steel Surfaces in Boundary Lubricated Sliding Contact. Netherlands, Elsevier. 7-15.
Makoto Miyajima, Kazuyuki Kitamura, and Keishi Matsumoto (2017). Characterization of Tribochemical Reactions on Steel Surfaces. Nippon Steel & Sumitomo Metal Corporation. No. 114.
S. K. Biswas (2000). Some Mechanisms of Tribofilm Formation in Metal/Metal and Ceramic/Metal Sliding Interactions. Netherlands, Elsevier. 178-189.
Cherkun V.V. Increasing the wear resistance of hydraulic pump gear trunnions by finishing antifriction non-abrasive vibration treatment [Abstracts dys. ... kand. tekhn. nauk: 05.02.04]. 2011. 16 p.
Kubych V.I. Increasing the wear resistance of tribo-conjugations of the crankshaft of an internal combustion engine by friction coating formation in gallium-indium medium [Abstracts dys. ... kand. tekhn. nauk: 05.02.04]. 2011. 18 p.
Shepelenko, I., Posviatenko, E., Cherkun, V. (2019). The mechanism of formation of anti-friction coatings by employing friction-mechanical method. Problems of Tribology, 24(1/91), 35-39. https://doi.org/10.31891/2079-1372-2019-91-1-35-39.
Krasota, A.M., Shepelenko, I.V., Krasota, M.V., Osin, R.A. (2024). Determination of Effectiveness and Component Classification of Technological Mediums for Finishing Antifriction Non-Abrasive Treatment of Automobile Details. Central Ukrainian Scientific Bulletin. Technical sciences. 10(41), II, 104-112. https://doi.org/10.32515/2664-262X.2024.10(41).2.104-112.
