Dependence of wear intensity on the coating material of the hydraulic cylinder of the garbage truck’s sealing plate
DOI:
https://doi.org/10.31891/2079-1372-2024-114-4-40-46Keywords:
wear, wear resistance, wear rate, hydraulic cylinder, mechanism, sealing plate, garbage truck, coating material, municipal solid waste, dependence, experiment planningAbstract
The article is dedicated to the study of the influence of the coating material on the wear rate of the hydraulic cylinder of the mechanism of the garbage truck’s sealing plate. By means of a first-order planning of experiment with first-order interaction effects using the Box-Wilson method, an adequate dependence of the wear rate of the hydraulic cylinder of the mechanism of the garbage truck’s sealing plate on the coating material was determined. It is established that according to the Student’s criterion, among the studied factors of influence, the intensity of wear of the hydraulic cylinder of the mechanism of the garbage truck’s sealing plate is most affected by the iron content in the coating, the least – by the chromium content, and the nickel content affects only indirectly in interaction with the iron content. The response surfaces of the goal function – the intensity of wear of the hydraulic cylinder of the mechanism of the garbage truck’s sealing plate and their two-dimensional sections in the planes of the influence parameters are shown, which allow to clearly illustrate the specified dependence of this goal function on individual influence factors. The expediency of conducting further research to determine ways to further improve the wear resistance of the hydraulic cylinder of the mechanism of the garbage truck’s sealing plate is shown
References
Dykha O., Sviderskyi V., Holenko K. (2024) Pidvyshchennia antyfryktsiinykh kharakterystyk porshnevykh ushchilnen kompresora kondytsionera avtomobilia [Increasing the anti-friction characteristics of car air conditioner compressor piston seals]. Herald of Khmelnytskyi National University. Technical sciences, 333(2), 314-321, https://doi.org/10.31891/2307-5732-2024-333-2-50.
Kharchenko V., Kindrachuk M., Marchuk V., Yurchuk A., Kostetskyi I. (2024) Kombinovana obrobka i mekhanizm znoshuvannia azotovanykh pokryttiv na tytanovomu splavi VT-6 [Combined treatment and wear mechanism of nitrided coatings on titanium alloy VT-6]. Problems of friction & wear, 103(2), 121-129, https://doi.org/10.18372/0370-2197.2(103).18694
Bereziuk O.V., Savulyak V.I., Kharzhevskyi V.O. (2022) Dynamics of wear and tear of garbage trucks in Khmelnytskyi region. Problems of Tribology, 27(3/105), 70-75, https://doi.org/10.31891/2079-1372-2022-105-3-70-75
Nosenko A.S., Domnickij A.A., Altunina M.S., Zubov V.V. (2019) Theoretical and experimental research findings on batch-operation bin loader with hydraulically driven conveying element. MIAB. Mining Informational and Analytical Bulletin, 11, 119-130, http://dx.doi.org/10.25018/0236-1493-2019-11-0-119-130.
Lobov N.V., Maltsev D.V., Genson E.M. (2019) Improving the process of transport of solid municipal waste by automobile transport. Proceedings of IOP Conference Series: Materials Science and Engineering. IOP Publishing, 1(632), 012033, https://doi.org/10.1088/1757-899X/632/1/012033.
Kotomchin A.N., Lyakhov Yu.G. (2019) Analysis of failures of knots and units of construction, road, lifting and transport machines and specialized motor transport on the example of MUE "Communalderservice". Engineering & Computer science, 3, 174-178.
Bereziuk O.V., Savulyak V.I., Kharzhevskyi V.O. (2023) Establishing the peculiarities of tire wear of garbage trucks during the transportation of municipal solid waste. Problems of Tribology, 28(1/107), 59-64, https://doi.org/10.31891/2079-1372-2023-107-1-59-64
Kabashev R.A. (1997) Road and construction machines: abrasive wear of the working parts of earthmoving machines. Almaty: Gylym.
Nurakov S.N., Savinkin V.V. (2008) About development methods for calculating the wear of the rod cylinder interface of hydraulic machines. Proceedings of the Karaganda State Technical University, 3 (32), 96.
Shalapai VV, Machuga OS (2023) Vtraty potuzhnosti u hidrotsylindri vnaslidok protikannia hidravlichnoi ridyny cherez neshchilnist [Power loss in a hydraulic cylinder due to hydraulic fluid leakage through a leak]. Integrated quality assurance of technological processes and systems – 2023: materials of the XIII International Scientific and Practical Conference, May 25-26, 2023, Chernihiv. National University “Chernihiv Polytechnic”, 287-289.
Kargin R.V., Yakovlev I.A., Shemshura E.A. (2017) Modeling of workflow in the grip-container-grip system of body garbage trucks. Procedia Engineering, 206, 1535-1539, https://doi.org/10.1016/j.proeng.2017.10.727.
Student MM, Gvozdetskyi VM, Kalahan OS, Posuvaylo VM, Shmirko VM, Sirak Ya (2015). Porivnialni kharakterystyky znosostiikosti oksydnykh ta nitrydnykh pokryttiv [Comparative characteristics of wear resistance of oxide and nitride coatings]. Problems of Tribology, 77(3), 54-59.
Korchak O.S., Bilenets K.E. (2019) Doslidzhennia trybotekhnichnykh vlastyvostei sylovykh tsylindriv hidravlichnykh presiv na bazi inzhenernoi metodyky otsinky yikh resursu bezvidmovnoi roboty [Investigation of tribotechnical properties of power cylinders of hydraulic presses based on an engineering methodology for assessing their uptime]. Material Processing by Pressure, 1, 186-192, http://dx.doi.org/10.37142/2076-2151/2019-186(48)
Bereziuk O.V., Savulyak V.I., Kharzhevskyi V.O., Alekseiev A.Ye. (2024) Determination of the regularity of the rate of wear of the working hydraulic cylinder of the mechanism of the sealing plate of the garbage truck from the pressing force. Problems of Tribology, 29(1/111), 38-44, https://doi.org/10.31891/2079-1372-2024-111-1-38-44
Mannapova O.V., Sokolov O.D. (2013). Vyznachennia skladu plazmovoho pokryttia za rivnem znoshuvannia [Determination of the plasma coating composition by the level of wear]. Problems of friction and wear, 2, 73-79.
