Improved mathematical model of the operation of hydraulic drives of garbage truck mounted sweeping equipment with regard to the wear of a cylindrical brush
DOI:
https://doi.org/10.31891/2079-1372-2025-115-1-92-99Keywords:
wear, mathematical model, rotational speed, mounted sweeping equipment, cylindrical brush, garbage truckAbstract
The article is dedicated to the improvement of the mathematical model of operation of hydraulic drives of mounted sweeping equipment of a garbage truck. An improved nonlinear mathematical model of the operation of hydraulic drives of mounted sweeping equipment of a garbage truck that takes into account the wear of a cylindrical brush, is proposed, which allowed to numerically study the dynamics of these drives during startup and determine that taking into account the wear of the cylindrical brush significantly affects such values as the pressure at the inlet of the hydraulic motor of the cylindrical brush and the angular velocities of both hydraulic motors. At the same time, the pressure at the inlet of the screw conveyor hydraulic motor after taking into account the wear of the cylindrical brush has hardly changed. The study of this mathematical model was carried out using the numerical Runge-Kutta-Felberg method of the 4th order with a variable integration step. It was also established the graphical dependencies to compare changes in the main parameters of the hydraulic drive of the garbage truck’s mounted equipment during startup without taking into account the wear of the cylindrical brush and with taking into account the wear.
References
Khomenko IM, Kindrachuk MV, Kobrynets AK (2010) Hranychnodopustymyi znos mashyn [Maximum permissible wear of machines]. Problems of friction and wear, 52, 28-37.
Dykha O., Sviderskyi V., Holenko K. (2024) Pidvyshchennia antyfryktsiinykh kharakterystyk porshnevykh ushchilnen kompresora kondytsionera avtomobilia [Increasing the anti-friction characteristics of car air conditioner compressor piston seals]. Herald of Khmelnytskyi National University. Technical sciences, 333(2), 314-321, https://doi.org/10.31891/2307-5732-2024-333-2-50.
Ministry of Development of Communities and Territories of Ukraine (2016) Stan sfery povodzhennia z pobutovymy vidkhodamy v Ukraini za 2015 rik [The state of household waste management in Ukraine in 2015]. URL: https://www.minregion.gov.ua/wp-content/uploads/2016/04/Zbortpv4-oblasti1.pdf.
Ministry of Development of Communities and Territories of Ukraine (2021) Stan sfery povodzhennia z pobutovymy vidkhodamy v Ukraini za 2020 rik [State of household waste management in Ukraine in 2020]. URL: https://www.minregion.gov.ua/wp-content/uploads/2021/06/rozdil-4-2020_oblasti.pdf
The Cabinet of Ministers of Ukraine (2004) Resolution No. 265 "Pro zatverdzhennia Prohramy povodzhennia z tverdymy pobutovymy vidkhodamy" ["On Approval of the Program for Solid Waste Management"]. URL: http://zakon1.rada.gov.ua/laws/show/265-2004-%D0%BF.
Priymachenko O.V. (2008) Metody vdoskonalennia tekhnolohii ochyshchennia dorozhnoho pokryttia [Methods of improving the technology of road surface cleaning]. Urban Planning and Spatial Planning, 29, 265-270.
Ivanchenko G.M., Lyutikov A.A., Cherednichenko P.P. (2015). Utrymannia vulychno-dorozhnoi merezhi mista [Maintenance of the city street and road network]. Urban Planning and Spatial Planning, 55, 174-177.
Nalobina OO, Bundza OZ, Holotiuk MV, Puts VS, Martyniuk VL (2022) Kontseptualne kompleksne otsiniuvannia efektyvnosti vykorystannia komunalnykh mashyn [Conceptual comprehensive assessment of the efficiency of municipal machines]. Scientific Notes, 73, 222-227.
Wahab M.A., Parker G., Wang C. (2007) Modeling rotary sweeping brushes and analyzing brush characteristic using finite element method. Finite Elements in Analysis and Design, 43(6-7), 521-532.
Xu Y., Ma T., Kong L., Zhao J., Li Y. (2023) Wear and Leakage Behaviors of Brush Seal Considering Eccentricity and Radial Deformation. Energies, 16(8), 3394.
Lepesh A.G., Lepesh G.V., Vorontsov I.I. (2011) The method of experimental determination of the durability of the brush pile and communal cleaning equipment. Technical and technological problems of service, 16(2), 7-19.
Tsekhosh S.I., Ignatov S.D., Demidenko A.I., Kvasov I.N. (2020) Increasing the life of the brush working equipment of a utility vehicle by using a device to control its position. Journal of Physics: Conference Series. IV International Scientific and Technical Conference "Mechanical Science and Technology Update", MSTU 2020. P. 012143.
Bereziuk O.V. (2021) Naukovo-tekhnichni osnovy proektuvannia pryvodiv robochykh orhaniv mashyn dlia zbyrannia ta pervynnoi pererobky tverdykh pobutovykh vidkhodiv [Scientific and technical grounds of designing drives of working bodies of machines for collection and primary processing of solid household waste] Diss. Doctor of Eng. Sciences: 05.02.02 - Mechanical Engineering, Khmelnytskyi, 482.
Bereziuk O.V., Savulyak V.I., Kharzhevskyi V.O., Semichasnova N.S., Harbuz Ye.S. (2024) Establishing the regularity of wear of a cylindrical brush of the mounted sweeping equipment of a garbage truck depending on its rotation frequency. Problems of Tribology, 29(2/112), 31-36.
Bereziuk O.V., Savulyak V.I., Kharzhevskyi V.O., Harbuz Ye.S. (2023) Determination of the dependencies of the wear influence of the cylindrical brush on the operational characteristics of the garbage truck's mounted sweeping equipment. Problems of Tribology, 28(4/110), 22-27.
