Chernets M.V. The influence estimation of radial clearance in sliding bearing on longevity and maximal contact pressures.
Abstract
The influence of radial clearance magnitude in a sliding bearing with small technological ovality of shaft on its longevity and maximal contact pressures has been investigated. It has been determined, that in the case of radial clearance decrease, the bearing longevity increases and maximal contact pressures decrease both for single-area and double-area contact. In the case of radial clearance decrease in the bearing from 0,41 to 0,11 mm (that is 3,72 times) its longevity increases by 1,84 times. During this process, the starting maximal contact pressures are decreasing for approximately two times and in the result of wear, their further decrease is taking place. When the clearance is approximate to zero ( = 0,01 mm), the longevity increases by 12,1 times. The results of the investigations have been presented graphically and tabularly.References
1. Chernets M.V., Liebiedieva N.M. Otsinka kinetyky znoshuvannia trybosystem kovzannia pry naiavnosti ovalnosti konturiv yikh elementiv za kumuliatsiinoiu modelliu. Problemy trybolohii, 2005, No 4, pp. 114 -120.
2. Chernets M.V., Andreikiv O.Ye., Liebiedieva N.M., Zhydyk V.B. Model otsinky znoshuvannia i dovhovichnosti pidshypnyka kovzannia za maloi nekruhlosti . FKhMM, 2009, No 2, pp. 121 - 129.
(Chernets M.V., Andreikiv O.E., Liebiedieva N.M. and Zhydyk V.B. A model for evaluation of wear and durability of plain bearing with small non-circularity of its contours. Materials Science, 2009, №2, pp. 279 -290.)
3. Chernets M.V. Kontaktna zadacha dlia tsylindrychnoho ziednannia z tekhnolohichnym ohranenniam konturiv detalei. FKhMM, 2009, No 6, pp. 93-99.
(Chernets M.V. A contact problem for a cylindrical joint with technological faceting of the contours of its parts. Materials Science, 2009, No 6, pp. 859 - 868.)
4. Chernets M.V., Zhydyk V.B. Uzahalnena kumuliatsiina model doslidzhennia kinetyky znoshuvannia pidshypnyka kovzannia. Ch.1. Liniina i kumuliatsiina model. Problemy trybolohii, 2012, No 4, pp. 11 - 17.
5. Chernets M.V., Zhydyk V.B. Uzahalnena kumuliatsiina model kinetyky znoshuvannia pidshypnyka kovzannia. Ch.2. Uzahalnena kumuliatsiina model. Problemy trybolohii, 2013, No 1, pp. 6 - 15.
6. Chernets M.V., Zhydyk V.B. Ekspres – metod doslidzhennia kinetyky trybokontaktnoi vzaiemodii u pidshypnyku kovzannia z tekhnolohichnoiu nekruhlistiu konturiv detalei. Problemy trybolohii, 2013, No 2, pp. 6 - 12.
2. Chernets M.V., Andreikiv O.Ye., Liebiedieva N.M., Zhydyk V.B. Model otsinky znoshuvannia i dovhovichnosti pidshypnyka kovzannia za maloi nekruhlosti . FKhMM, 2009, No 2, pp. 121 - 129.
(Chernets M.V., Andreikiv O.E., Liebiedieva N.M. and Zhydyk V.B. A model for evaluation of wear and durability of plain bearing with small non-circularity of its contours. Materials Science, 2009, №2, pp. 279 -290.)
3. Chernets M.V. Kontaktna zadacha dlia tsylindrychnoho ziednannia z tekhnolohichnym ohranenniam konturiv detalei. FKhMM, 2009, No 6, pp. 93-99.
(Chernets M.V. A contact problem for a cylindrical joint with technological faceting of the contours of its parts. Materials Science, 2009, No 6, pp. 859 - 868.)
4. Chernets M.V., Zhydyk V.B. Uzahalnena kumuliatsiina model doslidzhennia kinetyky znoshuvannia pidshypnyka kovzannia. Ch.1. Liniina i kumuliatsiina model. Problemy trybolohii, 2012, No 4, pp. 11 - 17.
5. Chernets M.V., Zhydyk V.B. Uzahalnena kumuliatsiina model kinetyky znoshuvannia pidshypnyka kovzannia. Ch.2. Uzahalnena kumuliatsiina model. Problemy trybolohii, 2013, No 1, pp. 6 - 15.
6. Chernets M.V., Zhydyk V.B. Ekspres – metod doslidzhennia kinetyky trybokontaktnoi vzaiemodii u pidshypnyku kovzannia z tekhnolohichnoiu nekruhlistiu konturiv detalei. Problemy trybolohii, 2013, No 2, pp. 6 - 12.
Downloads
Published
2014-07-10
How to Cite
Чернець, М. (2014). Chernets M.V. The influence estimation of radial clearance in sliding bearing on longevity and maximal contact pressures. Problems of Tribology, 69(3), 39–43. Retrieved from https://tribology.khnu.km.ua/index.php/ProbTrib/article/view/159
Issue
Section
Articles
