Contact melting and structure formation in the system: α-iron-nanomaterials - common quality carbon steel

Authors

  • V.I. Savulyak Vinnytsia National Technical University, Vinnytsia, Ukraine
  • А.А. Osadchuk Vinnytsia National Technical University, Vinnytsia, Ukraine

DOI:

https://doi.org/10.31891/2079-1372-2022-104-2-13-19

Keywords:

contact melting, carbon nanofibers, nanopowders, scrap metal, high carbon structures, microhardness.

Abstract

In this paper, processes of contact melting between steel plates, which arises after feeding the contact pulse of a contact welding machine, are studied, for cases when nanomaterials in the form of carbon nanofibers and powders of refractory metals are being located between the plates. It was established that the addition of carbon nanotubes allows to ensure the passage of contact melting with lower energy costs and to obtain high carbonaceous layers of considerable hardness, and the addition of doping elements makes it possible to control the structure, grainy and physical and mechanical properties of the formed material.

References

1. Savulyak V. I. Contact melting of unalloed steel with graphite in diffusive unstazinary mode./ V. I. Savulyak A.Yu. Osadchuk V. V. Savulyak / Bulletin of the Polytechnic Institute. Iasi, Romania . – №LIV (LVIII). 2008. P. 85-90.
2. Zalkin V.M The nature of eutectic alloys and the effect of contact melting “Metallurgy” / V.M Zalkin/ “Metallurgy”, 1987, 152 p.
3. Ahtubekov A. A. Diffusion kinetics of growth of the liquid phase upon contact of heterogeneous crystals / A. A Ahtubekov B. S Karamuzov Electronic journal "Research in Russia", 34, 465 - 474, 2000. http: // zhurnal.ape.relarn.ru / articles / 2000 / 034.
4. Savulyak V. I. On the influence of elements on the equilibrium temperature of eutectic transformations . / V. I. Savulyak, A.A. Zhukov, T.F. Arhipova //Metal science and heat treatment of metals. – 2000. - №2. – P. 3 – 8.
5. Ahkubekov A.A. Contact melting of metals and nanostructures based on them / A.A. Ahkubekov, T.A. Orkvasov, V.A. Sozaev. M.: Fizmatlit, 2008. – 152 p.
6. Korotkov P.K. The microstructure of the contact layers formed during the contact melting of copper with aluminum Surface / P.K. Korotkov, M.Z. Laypanov, A.R. Manukyants, M.H. Ponezhev, V.A. Sozaev / X-ray, synchrotron and neutron studies. – 2014. – № 7. – P. 109-112.
7. Hayrulaev M.R. Thermal effect during contact melting in the Pb-Te system. / M.R. Hayrulaev, D.H. Dadaev // Fizika, Baki: Elm, 2007. C. XIII, No 12, P. 7173.
8. Dadaev D.H. Contact melting in simple systems // Universum: Technical sciences: electronic scientific journal 2013. № 1(1). URL: http://7universum.com/ru/tech/archive/item/789
9. Savvin B.C. Contact melting kinetics in the nonstationary-diffusion mode. / B.C. Savvin, O.V.Mihalyova, A.A. Povzner /URasplavy-2001 -№2.-С.43-50
10. Thermokinetics of the initial stage of contact melting in peritectic systems with a chemical compound / V.P. Solntsev, V.V. Skorohod, K.N. Petrash, A.M. Shahnovskiy // Modern problems of physical materials science. Collection of scientific papers -- IPM NAS of Ukraine, 2013. — release. 22. — С. 181-185. — bibliography. 4 name. — рос.

Downloads

Published

2022-06-24

How to Cite

Savulyak, V., & Osadchuk А. (2022). Contact melting and structure formation in the system: α-iron-nanomaterials - common quality carbon steel. Problems of Tribology, 27(2/104), 13–19. https://doi.org/10.31891/2079-1372-2022-104-2-13-19

Issue

Section

Articles

Most read articles by the same author(s)

<< < 1 2