Structural and energetic self-organization of antifriction composite materials of car parts during friction and wear

Authors

  • A. Gypka Ternopil Ivan Puluj National Technical University , Ukraine
  • V. Aulin Central Ukrainian National Technical University
  • D. Mironov Ternopil Ivan Puluj National Technical University , Ukraine
  • R. Leshchuk Ternopil Ivan Puluj National Technical University , Ukraine
  • I. Yarema Ternopil Ivan Puluj National Technical University , Ukraine
  • V. Bukhovets Ternopil Ivan Puluj National Technical University , Ukraine
  • V. Teslia Ternopil Ivan Puluj National Technical University , Ukraine

DOI:

https://doi.org/10.31891/2079-1372-2024-112-2-67-73

Keywords:

tribo coupling, tribometer, vehicles, alloyed composite materials, friction and wear

Abstract

The development and research of composite materials for heavily loaded tribo-couplings of car parts was based on the main provisions of the concept of structural and energetic adaptability of their materials during friction and wear. The presented data of experimental studies of the effect of ultrasonic treatment of materials on the nature of the change in the coefficient of friction depending on the value of the specific load at a constant sliding speed. Data were obtained that characterize the features of structural adaptation and self-organization during friction and wear of copper and lead alloys. The research was carried out using a universal tribometer according to the "finger-disc" end surface contact scheme in the medium of inactive petroleum jelly. The use of composite wear-resistant materials is proposed to increase the tribological efficiency of car parts, units and assemblies. Experimental studies and analysis of the obtained data were carried out on the basis of the developed parametric scheme for the study of tribocouples of samples and parts using the main provisions of system analysis.

References

Aulin V. 2014. Physical basis of processes and states of self-organization in tribotechnical systems: Monograph / Kirovograd: V.F. Lysenko Publisher, 370

Kostetsky, B. I. (1985). Structural-energetic adaptability of materials under friction. Friction and Wear, 6(2), 201-212.

Bernát, R., Žarnovský, J., Kováč, I., Mikuš, R., Fries, J., & Csintalan, R. (2021). Microanalysis of Worn Surfaces of Selected Rotating Parts of an Internal Combustion Engine. Materials, 15(1), 158.

Starczewski, L., & Szumniak, J. (1998). Mechanisms of transferring the matter in a friction process in a tribology system: polymeric composite-metal. Surface and Coatings Technology, 100, 33-37.

Al-Quraan, T. M., Mikosyanchik, O. O., Mnatsakanov, R. G., & Zаporozhets, O. I. (2016). Structural-Energy characteristics of tribotechnical contact in unsteady operational modes. Modern Mechanical Engineering, 6(3), 91-97.

Kučera, M., Kučera, M., & Pršan, J. (2012). Possibilities for classification of tribological processes with regard to energy.

Kolesnikov, V. I. (2015). Nonclassical innovative methodology of development of compatibility of metal-polymer tribosystems. Journal of Friction and Wear, 36, 557-558.

Adetunla, A., Afolalu, S., Jen, T. C., & Ogundana, A. (2023). The Advances of Tribology in Materials and Energy Conservation and Engineering Innovation. In E3S Web of Conferences (Vol. 391, p. 01014). EDP Sciences.

Dykha, A., Padgurskas, J., & Babak, O. (2021). Prediction of the life time of cylindrical tribosystems of a vehicle. In IOP Conference Series: Materials Science and Engineering (Vol. 1021, No. 1, p. 012036). IOP Publishing.

Rodichev, A. Y., Novikov, A. N., Gorin, A. V., & Tokmakov, N. V. (2020, November). Technological support for the durability of the balancing suspension of the car. In IOP Conference Series: Materials Science and Engineering (Vol. 971, No. 5, p. 052081). IOP Publishing.

Dykha, A., Artiukh, V., Sorokatyi, R., Kukhar, V., & Kulakov, K. (2019). Modeling of wear processes in a cylindrical plain bearing. In Energy Management of Municipal Transportation Facilities and Transport (pp. 542-552). Cham: Springer International Publishing.

Ismailov, G. M., Tyurin, A. E., Gavrilin, A. N., Nevinitsyna, V. S., & Lomovskaya, S. A. (2020, September). Study of the identification model of tribological interaction of friction couples. In IOP Conference Series: Materials Science and Engineering (Vol. 919, No. 2, p. 022056). IOP Publishing.

Vojtov, V., Biekirov, A., & Voitov, A. (2018). The quality of the tribosystem as a factor of wear resistance. International Journal of Engineering & Technology, 7(4.3), 25-29.

Aulin V., Lyashuk O., Gupka A., Tson O., Mironov D., Sokol M., Leshchuk R., Yarema I. Tribodiagnosis of the surface damage of tribo-coupling parts materials during machine operation // Procedia Structural Integrity. – 2024. – Том 59. – С. 428-435.

Aulin, V., Gypka, A., Liashuk, O., Stukhlyak, P., & Hrynkiv, A. (2024). A comprehensive method of researching the tribological efficiency of couplings of parts of nodes, systems and aggregates of cars. Problems of Tribology, 29(1/111), 75–83. https://doi.org/10.31891/2079-1372-2024-111-1-75-83

Downloads

Published

2024-06-18

How to Cite

Gypka, A., Aulin, V., Mironov, D., Leshchuk, R., Yarema, I., Bukhovets, V., & Teslia, V. (2024). Structural and energetic self-organization of antifriction composite materials of car parts during friction and wear. Problems of Tribology, 29(2/112), 67–73. https://doi.org/10.31891/2079-1372-2024-112-2-67-73

Issue

Section

Articles

Most read articles by the same author(s)