Influence of factors of the electric arc spraying process on the properties of coatings
DOI:
https://doi.org/10.31891/2079-1372-2024-112-2-79-86Keywords:
electric arc spraying, properties, structure formation, technological factors, coatings, microhardness, density, adhesion strengthAbstract
The article discusses primary (technological factors) relating to the technology and conditions of spraying and secondary ones, which are derived from technological factors affecting the structure formation and properties of coatings. The paper examines the influence of spraying distance, dispersion of sprayed particles, wire material, etc. on the properties of electric arc coatings. Summarizing the results of research on the influence of factors of the electric arc spraying process on the structure formation and properties of coatings, the parameters of the electric arc spraying process were established, the method of preparing the surface before spraying was selected, etc. method of processing sprayed coatings.
References
Kharlamov Yu.A. Thermal spraying of coatings and ecological compatibility of production, operation and repair of machines. Heavy engineering. №2. 2000. P. 3-10.
Vilage B., Rupprecht K., Pokhmurskaya A. Features of gas-thermal spraying with flux-cored wires. Automatic welding. №10. 2011. P. 26-30.
Brusilo Yu.V. Choice of equipment for hardening and restoring parts of piston engines by arc spraying. Aerospace Engineering and Technology. Kharkiv: №4 (71), 2010. P. 38-42.
Matveishin E.N. Deposition of layers with high adhesion strength by methods of arc metallization. Automatic welding. 8. 2000. P. 20-22.
V.I. Pokhmursky, M.M. Student, V.S. Pikh Protective and restorative electric metallization of coatings from cored wires. New processes and equipment for gas-thermal and vacuum coating: Coll. of papers “Electric welding”. Kyiv: 1990. P. 66 - 69.
Student M.M. Development of old and new electrometallic coatings to cover powder darts: Thesis. Lviv: 1998. 18 p.
Pohmurskij V. I., Student M. M., Dovgunyk V. M. i dr. Poroshkovye provoloki sistem FeCrB+Al i FeCrB+Al+C dlya elektrodugovoj metallizacii. Avtomaticheskaya svarka. 2002. № 3. S. 32-35.
V. I. Pohmurskij, I. I. Sidorak, M. M. Student. Opyt primeneniya poroshkovyj provoloki FMI-2 dlya elektrometallizacionnogo naneseniya vosstanovitelnyh pokrytij. Avtomaticheskaya Svarka. 2002. №2. S. 3-4.
Pokhmurska G.V., Dovgunik V.M., Student M.M. Wear resistance of laser-modified electric arc coatings from cored wire FMI-2. FKhММ № 4. 2003. P. 61-64.
L.A. Lopata, N.A. Medvedeva, T.M. Tunik, S.G. Salii Improvement of sprayed coatings. World of Engineering and Technologies. 8 (54), 2005. P. 54-56.
Ageev M.S., Volkov Yu.V., Chigrai S.L. Protective and hardening coatings in ship building and repair. Science Bulletin KhDMA. Kherson: №2 (13). 2015. P.110-124.
